Laser Settings for Fabric & Textiles
Can you laser cut fabric?
Yes — CO2 lasers cut natural fibres (cotton, felt, denim, linen) cleanly, and synthetic fibres like polyester cut with melt-sealed edges that never fray. Low power, high speed is the rule.
CO210.6 µm settings
| Variant | Operation | Speed | Power | Passes | Ref. |
|---|---|---|---|---|---|
| Fabric (cotton, felt, denim) | Cut | 50–100 mm/s | 15–30% | 1 | 60 W |
✓ CutNatural fibres cut clean; polyester edges melt-seal.
PrepPreparation & technique
Hold fabric flat with magnets or a light frame. Test on scrap — weights and weaves vary hugely.
⚠ SafetyVery flammable — fire watch throughout. Never laser fabrics with unknown coatings or PVC-based prints.
LearnMatching tutorials
All values are starting points at the stated reference wattage. Run a test grid on your own machine and material batch first.